Application of aluminum-plastic panels in the home improvement industry

Aluminum-plastic panels have entered home decoration in recent years, and are widely used because of their smooth surface, bright colors, strong impact resistance, easy cleaning, strong durability and fast construction. Aluminum-plastic panels are divided into two categories: exterior wall engineering panels and interior wall decorative panels, and the latter is generally used for home decoration. Aluminum-plastic panels are divided into double-sided and single-sided types. The surface of the double-sided aluminum-plastic panel is all rust-proof and high-strength aluminum alloy plate. Spray on the front side, the natural color of the aluminum plate on the reverse side. The single-sided aluminum-plastic panel only has a layer of aluminum alloy plate on the surface, which is slightly worse in strength and cheaper in price. Surface spray painting quality, good aluminum-plastic adopts imported hot pressing spraying process, the color of the paint film is uniform, the adhesion is strong, and it is not easy to peel off after scratching.
Home decoration with aluminum-plastic panels are generally used in restaurants, kitchens, bathrooms and rooms heating covers, partitions and other shapes, construction, first of all, the base surface of the board should be dry and flat, it is best to use multi-layer boards, joinery boards as the bottom layer, to prevent cracking and deformation. Secondly, when pasting the aluminum-plastic panel, pay attention to the gluing must be uniform, wait for the volatilization of the superglue thinner, touch it by hand and stick to it, and use a wooden hammer to knock and compact. When using aluminum-plastic panels, pay attention to dividing into several pieces according to design requirements. It is not suitable for use in a whole sheet or a large area, otherwise it is easy to cause empty drumming glue. The joints and grooves of aluminum-plastic panels are generally sealed with glass glue, and it is required that the glass glue must be evenly and fully sealed when sealing, and the surface should be cleaned up after drying, so that the line thickness is consistent.